JB-TS6 Intelligent Carbon Silicon Analyzer is widely used in online measurement of Gray Iron, Malleable Cast Iron, Ductile Iron, Vermicular ion or alloy cast iron for some key index such as carbon equivalent, carbon content, silicon content, sample temperature(TM), liquidus curve(TL), solidus line(TE), etc. It's an indispensable tool for quality control in the casting industry.
Function&Feature
Guide content adjustment before furnace: it can calculate the adding quantity of carburant, ferrosilicon or steel scrap, compared with the target composition, weight of molten iron and yield base on the test results.
Nodularity measurements: By measuring molten iron for acrbon saturation degree and supercooling degree, with enough content of active Mg, calculate nodularity rate.
| Main Technical Parmaeter |
|
|
| Itme |
Range |
Accuracy |
| Resolution |
0-1370ºC |
0.1%F.S |
| CE% |
2.30%-4.83% |
±0.10% |
| C% |
2.20%-4.30% |
±0.05% |
| Si% |
0.30%-3.80% |
±0.10% |
| SG% |
60%-95% |
±10.0% |
| Rm |
HT100-HT350 |
Min |
Precautions
There is a high voltage inside the instrument. Be sure to turn off the power before opening the back cover.
The signal cable disconnected, need to be replaced by the same type of temperature compensation cable, if use other cables, will not get the correct measurement results.
Audited Supplier 
){kind=link}