- Best Quality JB-750 Optical Emission Spectrometer is the best assistant for rapid quantitative analysis of metallurgical furnace and metallic quality monitoring.
- Its accuracy and stability meet laboratory requirements and can make measurements for dozens of matrix based on elements such as Fe,Al,Cu,Ni,Co,Ti,Mg,Zn,Sn,Pb, etc.
- It is widely used in steel, metallurgy, foundry and machinery for IQC, QC and OQC.
- JB-750 is a design of zero fault operation, which requires little maintenance and offering high reliability and convenience.
Features
- 750 mm focal length grating design with palmer type runge device which has the features of high vacuum, high resolution and high sensitivity etc.
- Adopt high stability digital sources. You can choose different excitation parameters to analyze different samples which can get the best analysis results.
- The automation is very high which adopts high integration of the acquisition and control system.
- The photomultiplier tubes from Hamamatsu which has the features of low dark current, high signal-to-noise ratio, long service life etc.
- It can be used for variety of bases such as Fe, Al, Cu, Co, Ni, Pb, Mg, Zn, Sn etc.
- The temperature of the optical part is stable which ensure the instrument running well and reduce the requirement of the environment.
- The system adopts independent power supply and becomes unit which is easy to use and simple maintenance.
- The computer adopts Windows 7 system and English operation software which is simple to understand.
Technical Parameter
| Optical System: |
Excitation Desk: |
Palmer type - runge device
Focal length of grating: 750mm
Wavelength range: 130-650nm |
Open spark desk
All kinds of fixture for special applications
A cyclic flow saves the argon gas design
Can quick swab incident window and replace
Gap analysis: 4 mm |
| Excitation Light Source: |
Programmable pulse digital light source
Discharge frequency: 100 -1000Hz
High-energy pre-combustion technology
Ignition pulse amplitude: +15KV
Peak pressure of main loop: 400VDC |
| Working Environment and Power Supply: |
Power supply: 220V±10%,50Hz±2%
Max power: 1000W, standby 200W
Working temperature: 10-30ºC
Relative humidity: 20-80%RH |
| Requirement of Argon Gas: |
| Purity>99.996% |
Size and Weight: |
| Inlet pressure: 0.5MPa |
Size: L112×W75×H92cm
Weight: 266 kg / 586 lb |
| Excitation flow: 3L/min |
Factory/Workship/Certificates/Exhibition/Customer's Visit and Site Abroad
installation
Company Information
WUXI JIEBO ELECTRICAL TECHNOLOGY CO., LTD. is a modern high-tech enterprise, which professionally
dedicated to the research, production, marketing and sale of high-speed analytical instruments, such as
Optical Emission Spectrometer, Carbon and Sulfur Analyzer, Furnace Molten Iron Carbon Silicon Analyzer,
X-Ray Fluorescence Spectrometer, Hardness Tester, Ultrasonic Flaw Detector, etc.
Why choose JIEBO?
1).Flexible oversea network to provide immediate local response.
2).Create the economic solutions with the facility to manufacture the major equipment in the industry.
3).Creative and practical teamwork.
4).Experienced training system to provide the training of owner's/ plant sub-system operating and maintenance personnel.
5).Perfect supply chain and capable global procurement.
6).Good Systematic management control.
What's the whole order procedure?
1).Inquiry with interested type, quantity through e-mail or directly calling.
2).Negotiate all details about this order.
3).Tell consignee information to make ProformaInvoice.
4).Arrange production as advanced payment reached.
5).Ship out goods as the balance payment received.
6).Send out B/L, CO, and other documents that customers required.
7).Customers signed the good, and engineer fly there to installation.
8).After-sale department call back to survey the customers' satisfication.
What's the Warranty?
1 year after installation. And all life-time maintain.Life-time warranty. Any problem caused by our party within
one year from the date of shipment, we will provide free spare parts for the repairment. After one year, we can
provide the spare parts, but the user should pay for the related cost, including cost of the spare parts, delivery
cost etc.
Are customized products accepted?
Yes, of course customized products is acceptable. Just communicate with us.
Audited Supplier 
){kind=link}